Would you like to delegate certain tasks?

My work exhilarates me and I enjoy the activities in my studio. Certain activities are monotonous repetitions. After a day of these, I get cross-eyed.

The learning curve with Tinkercad is more work than I assessed. I have figured out how the Ultimaker 2 3D printer handles measurements depending on heights and widths. I have redrawn my prints so many times...did I mention redo, redo, redo and redo! Oh! and re-measure. An Epson or an Ultimaker 2, Aargh!

As simple as my Tinkercad drawings are they are difficult to print. I should job out this task for sure! There were changes and savings too numerous to illustrate. Here are a few images that show the steps I took to break down the slipcase into two pieces to print. The last drawing is ready for print. Let's see if this works!

© 2016 Louise Levergneux, 3D printed slipcase for Xtraction

Do you thrive on endless repetitions? Is it meditation?

Which experience is worse drawing in Tinkercad or Miguel Endara’s pencil touching the paper 32 million times to create Hero?

Karina Smigla-Bobinski gave the task of drawing to the audience that came to play with her kinetic sculpture installation.

ADA is a post-industrial "creature" self-forming artwork. She is a 3m diameter PVC balloon performance machine and her patterns of lines and points, get more and more complex as the number of people playing increases. What an experience this must have been!

Adrian Göllner, an installation artist who collects old wind-up alarm clocks. Compelled by the energy stored in the spring of over-wound clocks, Adrian channelled this found energy into drawings.

The Clock Drawings were either created by the clock’s movement, which was directly set atop a piece of carbon paper, or the movement was suspended just above the carbon paper. In both cases, when the alarm spring was released, the hammer struck the surface and made a mark.

Each clock used to create a drawing had its own particular temperament. Getting a clock to run continuously or convincing it to give up the energy bound on its alarm spring often required a specific apparatus. As a result, the weight of the drawn lines and the size of the paper vary considerably. Each drawing is presented in simple box frame and accompanied by a one-page account of the drawing process and Adrian’s suppositions about the clock owner’s circumstances.

The first of the alarm spring drawing was created using an old Italian Veglia alarm clock. When released, the alarm hammer struck the surface of the paper so vigorously that it dragged the movement for 3.5cm.

“The person to last service the old Italian Veglia alarm clock had written his name and a date on the inside of the clock case, which allowed me to conclude that I had just witnessed and recorded Possibly the Last of Bill Tets, Clock Repairman,” as narrated by Adrian.

© 2009-2011 Adrian Göllner, Possibly the Last of Bill Tets, Clock Repairman — © 2009-2011 Adrian Göllner, Possibly the Last of Bill Tets, Clock Repairman

To facilitate another clock drawing, Adrian partially disassembled the clock and prepared a piece of paper to fit over the face. He then started the clock, fitted the piece of paper and replaced the minute hand of the clock. Glued to the minute hand was a small pencil lead. Powered by the winding motion of an old farmer’s hand some seventy or eighty years ago, the lead was dragged across the surface of the paper for a period of 3.86 hours.

© 2009-2011 Adrian Göllner, 1919 Westclox Big Ben, Style 1A Alarm Clock — © 2009-2011 Adrian Göllner, 1919 Westclox Big Ben, Style 1A Alarm Clock

These drawings intrigue me, the straightforwardness of the idea gives me chills, brings me back to old history. The drawings are pure and the energy is strange and yes, Adrian ghostly.

What could I devise to help with the monotonous tasks still ahead? How does an artist rethink the process or think minimalism?

Simplicity is best, but for right now my new project needs its final feature to be complete!